Although the bulb version fits the same way as the LED outer unit, I can't say if it's the same for the inner. So what I did was; 1) Removed the centre trim panel at the top of the rearwindscreen. It's just clip studs into the body panel and a couple of plastic ones into the adjacent white panels.

Hi, my interior light on MK2 focus went weeks back, mechanic gave me a spare bulb when I had mot last week. I replaced bulb but still not working still .. I check fusebox today fuse 104 I think. Carry out replacement in the following order: Step 1. Open the hood. Step 2. Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. Step 3. Remove the engine cover. AUTODOC recommends: Replacement: engine oil and filter – Ford Focus MK2 diesel. FORD FOCUS MK3 REAR TAIL LIGHT REMOVAL REPLACEMENT 2012 2013 2014 2015 2016 Check Out Our Website: http://mechaniclifestyle.com OUR MAIN CHANNEL: http://bit
Repeat this for the second light. 12. Transferring Lights Place the two plastic grooves in the new trim, exactly where they were on the old trim. By this I mean so that the tiny Ford emblems read ‘Ford’ left to right. Gently snap in the metal piece. Make sure to push the light in all the way, it will ‘click.’ Repeat this for the second
To remove the light fitting, undo the 2 torx screws, slide the light fitting rearwards slightly, this releases the front lugs, then slide the light fitting forward, this releases the rear lugs. Thanks mate, I'll give that a try. This is an older thread, you may not receive a response, and could be reviving an old thread.
Robbo. 4749 posts · Joined 2007. #3 · Mar 18, 2018. The gaiter is different though, and I reckon the facelift knob feels daft. The PFL knob feels good in the hand :lmao: I gave up on leather bound knobs, not into bondage :lol: :facepalm: I have a black nylon one with a 6 speed pattern on the top. Never wear out :woohoo: Hi all, I have recently purchased some upgrade l.e.d tail light units from ford. Took 4 weeks to arrive as ford didn't have them in stock, this is very true as the manufacture date on the units is dated 8 days after my placement of order last month. Guide now available in PDF Format see link: htt

Quick run down on how to test for a faulty reverse light switch and how to replace it on a Focus mk2 with the M66 gearbox (Focus XR5/ST225 Focus RS mk2)Rever

CcRq9.
  • dw59fdg2ed.pages.dev/101
  • dw59fdg2ed.pages.dev/366
  • dw59fdg2ed.pages.dev/160
  • dw59fdg2ed.pages.dev/440
  • dw59fdg2ed.pages.dev/366
  • dw59fdg2ed.pages.dev/404
  • dw59fdg2ed.pages.dev/275
  • dw59fdg2ed.pages.dev/412

    • ford focus mk2 interior light removal